CCS Architecture designed this 5,800 square foot home for a family of five in Palo Alto, California. The clients both work in the Silicon Valley, and they have 3 young children. The design is specific to their close-knit family needs as well as their rigorous sustainability standards. The architecture is contemporary, but it has warm, authentic materials and refined details to accommodate a casual, unpretentious lifestyle.
The home's bent, linear configuration divides the site; the public, street sides wrap the corner, creating a more private interior. A breezeway leads to the entry and the yard beyond, while also separating the main house from the garage and studio. The second floor bridges over these two and becomes the ceiling of the breezeway.
The lower part of the house has primary walls of highly crafted rammed earth made with soil excavated from the site. The upper floor, framed in wood and steel, is clad in wood siding plus aluminum panels. Between the two is an 18-inch ribbon of glass that admits soft light and views while making the upper floor appear as if it is floating.
The home's Genkan entry is a feature of Japanese houses. Exterior stone paving extends into the entry, where shoes are removed. The interior floor steps up six inches. Living functions--kitchen, dining, family room and office--inhabit the lower level, and all face a stone-paved courtyard with a Callery Pear tree. The yard beyond is landscaped with a synthetic lawn and drought-tolerant meadow grasses. An L-shaped interior façade with 65 feet of wood-framed, sliding glass doors, maximizes the indoor-outdoor connection. Circulation is a continuous flow that emphasizes the counterpoint between solid and open.
The second floor contains a library plus three bedrooms and two bathrooms. An 80-foot long "gallery of light" connects the bedrooms and bathrooms; its skylights and windows are designed to animate the walls with geometric shapes derived from washes of light and shadow.
The stairway between floors is located where the house bends to form an angle. It leads up through an open space that connects the library above to the home office below, with natural light filtering in from the clerestory windows at the raised roof.
Across the breezeway is the garage/studio building. The studio is a general work space, but it also has a full kitchen and bathroom for long-stay guests.
The homeowners opted to install meadows and synthetic turf grass rather than a traditional yard. The street sides are planted with a mix of Japanese Maples, Ginkgos and native grasses to create a privacy buffer. The site interior is planned for playing and outside living. Stone paving enhances the indoor-outdoor connections close to the house. The artificial lawn requires no maintenance and no water. The meadow beyond is laced with an infinite path, shaped like a figure- eight.
All landscaping is comprised of drought tolerant plants that can survive the hot Palo Alto summers with little water. The homeowners have planted a fully functional vegetable garden with citrus trees, herb garden, organic fruits and vegetables, and large composting bins.
Roof-mounted solar panels include a six-kilowatt photovoltaic array to generate electricity and a thermal water panel array that provides domestic hot water. The latter also preheats the water for radiant floors throughout the house.
A high-efficiency gas boiler provides back-up heat in winter months.
A north-facing light monitor (atop the two-story stair) brings in even, north light, with operable windows to naturally flush the house of excess heat in the warm summer months. This works in concert with the low-story windows, which draw in fresh, cooler air for passive cooling.
44 McLea Court San Francisco California 94103 415.864.2800 tel 415.864.2850 fax www.ccs-architecture.com
Rammed-earth walls are pneumatically-compacted, 16-inch thick walls that wrap around the lower floors of the house. Soil from the site comprises about 50 percent of the walls' content. In addition to being a sustainable material, rammed earth has a thermal mass that helps modulate temperature fluctuations throughout the year.
Concrete foundations are made with 30% fly ash concrete.
All windows and glass doors have low-e, high performance glazing, and most are operable for natural ventilation.
The house was built on a flat, downtown lot whose previous home was carefully deconstructed to minimize waste.
Local Materials, Locally Made
Cabinets throughout were made by Spiral Design of South San Francisco using domestic hardwood.
Wood walls were made on site by a local subcontractor, Arroyo Construction, in neighboring Menlo Park.
Dining table, master bed and bedside tables were designed by CCS Architecture and fabricated by Custom Furniture Design in San Francisco.
Built-in sofa was designed by CCS Architecture and fabricated by Kroll Furniture of San Francisco.
Aluminum metal work was by Florian Industries of Brisbane, CA.
Landscape was designed by CCS and “meadow consultant” John Greenlee. It was installed by Siteworks from Berkeley, CA, and all plants were sourced from Brisbane and Chino, CA.
Synthetic turf system is “Heavenly Green” from Northern California's exclusive Field Turf distributor.
Ipe siding, while not local, is 100 percent natural, maintenance free, and does not have chemically produced additives. Unlike other siding options, Ipe easily resists termites, mold, and wood rot. It maintains its strength even in the harshest environmental conditions.
Hardwood flooring is American walnut, sourced from Golden State Lumber in San Rafael, CA.
Concrete floors are approximately 30% fly ash, a byproduct of burning coal to generate power. Using fly ash helps
reduce the energy cost and heavy environmental toll of cement production.
Aluminum windows are by Fleetwood, fabricated at a production plant in Corona, CA.
Stainless steel counters and hood were fabricated by American Metal Products, a small custom metal shop in San Francisco.
Rammed earth subcontractor is David Easton, the leading innovator of forming and delivery technologies for constructing rammed earth walls. He is California-based and specializes in custom mix designs with an emphasis on site-sourced earth.
Deconstruction of Previous House
The existing house was an unremarkable mix of styles and spaces—a 1930s structure that was haphazardly added onto over the years. The site also included a pool, which was deconstructed as well.
Typically a house would be demolished and the waste shipped to a landfill. In this case, the house was deconstructed piece by piece over the course of a five-week period. Most of the materials that were not objects, such as plumbing and electrical fixtures, were broken down and shipped to nearby recycling centers. The balance of the materials were either broken down and reused in some other form, i.e. gypsum and plaster were reused as road base or filler in other construction. The ReUse People took other materials, i.e., clay roof tiles, windows and light switches, for resale.
While deconstructing the existing pool, we found the subsurface soil to be a good match as base material for the rammed earth walls of the new house. About 50% of the material in the new rammed earth walls is comprised of soil from the site.