Add To Collection
Add to Collection
E2E Offices
E2E Offices
Maipú, Chile
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
Other Projects by 57STUDIO
E2E Offices
Maipú, Chile
In the middle of an old factory, we were commissioned to renovate a warehouse and a series of attached sheds for a new industrialized building solutions company called E2E. Our proposal was to recycle the old warehouse and demolish other minor sheds to increase the surface of green areas and locate the new offices next to a group of existing trees.
Through a two-story compact volume, mostly closed to its direct industrial environment, the building aims to integrate nature into work spaces, opening completely one of its facades to the largest area of the shaded garden.
From a 12 x 12 m square plan and using a 1.2 x 1.5 m modular grid, we developed a mass timber structure based on coffered beams and CLT panels, that rests over a series of perimeter columns. This system reduces the section of the beams and concentrates the supports and bracings on the edge, allowing wider and more flexible spaces on the interior.
The integral wooden solution is left exposed towards the interior, while the exterior combines a glass curtain wall that uses the timber columns as mullions and a ventilated facade with fiber cement plates and lattices of the same material used in front of the service area. Thus, the building exhibits the main materials used in production at E2E, such as fiber cement and the wooden structure.
Through a two-story compact volume, mostly closed to its direct industrial environment, the building aims to integrate nature into work spaces, opening completely one of its facades to the largest area of the shaded garden.
From a 12 x 12 m square plan and using a 1.2 x 1.5 m modular grid, we developed a mass timber structure based on coffered beams and CLT panels, that rests over a series of perimeter columns. This system reduces the section of the beams and concentrates the supports and bracings on the edge, allowing wider and more flexible spaces on the interior.
The integral wooden solution is left exposed towards the interior, while the exterior combines a glass curtain wall that uses the timber columns as mullions and a ventilated facade with fiber cement plates and lattices of the same material used in front of the service area. Thus, the building exhibits the main materials used in production at E2E, such as fiber cement and the wooden structure.
Product Spec Sheet
Were your products used?
Join as a manufacturer to add your products.