Tower House

Portland, OR, United States

Add To Collection

Featured products in this project 1

Other Projects by Waechter Architecture

Add To Collection

Tower House

Portland, OR, United States

Firm

Waechter Architecture

Type

Residential › Private House

YEAR

2013

The Tower House is perched on a small shelf along steep topography downhill from NW Cornell Road. It touches the ground lightly and is built up rather than out. The house is accessed by a thin steel pedestrian bridge that meets the house at its mid level, the dining room and hub of the house. Like a medieval tower house, this tower house has one primary room per floor with support spaces incorporated into the building perimeter.

THREE ROOMS
The Tower House is conceived as 3 main rooms (LIVING, DINING and BEDROOM) floating loosely in a tubular shaped building skin or “sleeve.” These are the dominant rooms of the house. They are tall, generous volumes of space finished with oil rubbed quarter sawn white oak. The white oak palate is limited to these spaces creating a strong threshold between inside the room and out, heightening ones sense of being held and contained.

SLEEVE
The cladding of the house is seen as a sleeve, as if it were a stretchable garment pulled down tight over the structure. It is made of black vertical corrugated steel with rounded corners eliminating the need for corner trim. It is a continuous, uninterrupted surface punctuated only by the window openings and loggias.

IN-BETWEEN
Between the 3 main rooms and the exterior sleeve of the house, the spaces take on a cellular structure, adjusting to fit functional requirements while keeping within the space provided. Stairs, bathrooms and closets are the building blocks of this interstitial space. The stairway, with offset interior and exterior openings, acts as light loft refracting light within its 3 foot width and providing the main rooms with a soft, filtered ambient glow. Closets and bathrooms have an intimate scale with a sense of being tucked away, hidden and private.