Add To Collection
Add to Collection
ecohaus
ecohaus
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
View Original
Add To Collection
Add to Collection
ecohaus
Type
>>Project Description
The site plot sets to be a bit site less or neutral. The planning expects to be made irrespective of the differentiated macro site conditions.
The house whose form is characterized by irregular voids is the 4 storey high up to near 10m intends to be planned in consideration of the environmental design and the passive principle with the low energy consumption within the highly dense area.
The genetic algorithm is used to reproduce architectural volumes formulating some rules which are of architectural planning or conditions.
These are mitigated constraints in consideration of the trade off theory. Thus, finally, the offspring objects are created and one of the apparently the most suitted objects to the criteria set up is selected and transformed into the final housing.
The Sketch up is used to tranform the abstract model into the final building model, 3 dimensionally and on the basis of relevant factors for the Building Information Modelling.(BIM).
Key features of this projects are as follows:
-The Wall Reinforced Concrete(WRC) sandwiched by rammed earth finishes with the limes(and cements) on both interior and exterior faces.
-The frontal entrance side is north facing with the long vertical and horizontal slits whilst the south facing part is in principle surrounded by the peripheral buildings but contains large openness for the intake of the natural light and air.-The frames of that openness are made of wooden plywoods pursuing the through use of the ecological materials.
-Overlapped or marged interior boxes induce to create stepped spaces, subspaces, storage rooms,openness and the slits in order to create the definite spatial configuration and organization of the house on the basis of the raum plan, decimal spaces of Adolf Loos.
The site plot sets to be a bit site less or neutral. The planning expects to be made irrespective of the differentiated macro site conditions.
The house whose form is characterized by irregular voids is the 4 storey high up to near 10m intends to be planned in consideration of the environmental design and the passive principle with the low energy consumption within the highly dense area.
The genetic algorithm is used to reproduce architectural volumes formulating some rules which are of architectural planning or conditions.
These are mitigated constraints in consideration of the trade off theory. Thus, finally, the offspring objects are created and one of the apparently the most suitted objects to the criteria set up is selected and transformed into the final housing.
The Sketch up is used to tranform the abstract model into the final building model, 3 dimensionally and on the basis of relevant factors for the Building Information Modelling.(BIM).
Key features of this projects are as follows:
-The Wall Reinforced Concrete(WRC) sandwiched by rammed earth finishes with the limes(and cements) on both interior and exterior faces.
-The frontal entrance side is north facing with the long vertical and horizontal slits whilst the south facing part is in principle surrounded by the peripheral buildings but contains large openness for the intake of the natural light and air.-The frames of that openness are made of wooden plywoods pursuing the through use of the ecological materials.
-Overlapped or marged interior boxes induce to create stepped spaces, subspaces, storage rooms,openness and the slits in order to create the definite spatial configuration and organization of the house on the basis of the raum plan, decimal spaces of Adolf Loos.
Product Spec Sheet
Were your products used?
Join as a manufacturer to add your products.