The existing Administration Building & co wood stove in German has complied with its size and capacity no longer meet the company's expansion had become imperative. The original house is in its design elements largely preserved and incorporated into the overall design concept. The subject of wood is measured in design and construction special attention, then the convergence constructive bearing components, and the facade panels made of wood, and wood materials. External wall and roof surfaces of the body are made from high office insulated wooden prefabricated elements. The material of ventilated facades, and roofing, are irregular in width and cut wood strips mounted at different distances, and use weather-resistant multi-layer plates impregnated wood. At the interface of the existing building and the west side completed new building, the entrance area and the three-storey transparent lobby are located. The ground floor reception area, training and meeting room will be partially dug into the hillside. The higher-lying area on the north side by a sloping embankment fliest directly into the open ground floor of the building. The history of the land pattern continues in the interior, combining the level of the forecourt and rear garden areas situated. Above the ground floor and covered with porphyry exterior surfaces of the cantilevered structure floats with the job of management and technology company. The offices are designed as a small group of agencies and categorized according to work areas. Common areas are centrally located directly on the development of the work spaces are located west and east in the building and are thus captured. About the walk-in connection on the north side of the building near the production facilities will be achieved. The high A + Energy performance standard is achieved by the highly insulated building envelope, as well as through the use of structurally sound materials.