THIS RESEARCH WAS PRODUCED BY THE SENSE‘ABLe’ CITY LAB AT MIT, DIRECTED BY CARLO RATTI AND ASSAF BIDERMAN. The feature has been created in collaboration with urbanNext, a multi-platform aimed at developing, disseminating and distributing content centered on architecture through a focus on the contemporary human milieu and its challenges. Architizer features a weekly discussion from urbanNext’s journals to support its investigation of urban conditions and innovations facing the architectural profession today.
Imagine a future where immense amounts of trash didn’t pile up on the peripheries of our cities: a future where we understand the ‘removal-chain’ as we do the ‘supply-chain,’ and where we can use this knowledge to not only build more efficient and sustainable infrastructures, but to promote behavioral change. In this future city, the invisible infrastructures of trash removal will become visible and the final journey of our trash will no longer be “out of sight, out of mind.”
Elaborated by the Senseable City Lab and inspired by the NYC Green Initiative, TrashTrack focuses on how pervasive technologies can expose the challenges of waste management and sustainability. Can these same pervasive technologies make 100-percent recycling a reality?
TrashTrack uses hundreds of small, smart, location-aware tags: a first step toward the deployment of smart-dust: networks of tiny locatable and addressable microelectromechanical systems. These tags are attached to different types of trash so that these items can be followed through the city’s waste management system, revealing the final journey of our everyday objects in a series of real-time visualizations.
The project is an initial investigation into understanding the ‘removal-chain’ in urban areas, and it represents a type of change that is taking place in cities: a bottom-up approach to managing resources and promoting behavioral change through pervasive technologies. TrashTrack builds on previous work of the Senseable City Lab in its exploration of how the increasing deployment of sensors and mobile technologies radically transforms how we understand and describe cities.
How the trash tag works
Trash Tag
The trash tag periodically measures its location and reports that data to the server via the cellular network. The first generation of trash tags was based on GSM cellular phone technology that estimates the tag position by measuring signal strength from each cell tower in sight of the device and comparing it to a map of cell phone towers — a technique known as CellID triangulation. The location accuracy is not as good as GPS but tends to be more robust, as cellular signals can be picked up inside buildings and from within piles of trash, not requiring an unobstructed sky view.
Our second generation of tracking tags uses the best of both worlds: GPS and CDMA cell-tower trilateration based on the Qualcomm inGeo™ platform in combination with Sprint’s cell phone network, utilizing Qualcomm’s gpsOne® technology to provide both accuracy and availability for position-tracking applications like ours. Future generations of devices will work seamlessly across CDMA/GSM/UMTS networks, a feature that will allow tracking items across international borders.
Trash Track Running
In order to ensure a long enough lifetime to track the trash to its final destination, we developed ‘duty cycling’ algorithms, which we use along with inGeo™’s “Low Duty Cycle” technology that provides hibernation capabilities that keep the tag off most of the time, turning it on only every few hours to sense and report its position.
The tag also uses a motion sensor, which allows it to continue being in hibernation mode if no movement has been detected, thus further extending the battery life. If movement has been detected, the motion sensor wakes up the device to check and report its new position. Our algorithms vary the sampling rate in response to conditions sensed by the tag. In particular, the tag uses a set of orientation sensors to sense changes in position to increase the location sampling rate when the tag is apparently moving and whenever previously unseen cell tower IDs are observed.
All of the components used in the tags are RoHS compliant, which means that toxic material levels are below both US and European Union standards for electronics products for which the Trash Track tags can be legally introduced into waste streams.
Trash Track Mapping
The triangulation / tower location service is provided by Navizon.
How the system works
How the tags were deployed
Apparently a trivial task, throwing away trash becomes quite distinct when trying to follow its journey object by object. Inserting the Trash Track tags into the waste removal chain requires attention to a number of critical aspects:
- Achieving a balance in the different types of objects to be tagged and disposed of in terms of component materials, type of technology, object size and product functionality
- Attaching the tags to waste objects involves resolving how to adhere the tags and how to protect them from physical impact and water
- Registering each unique tag number with an object’s name, specifications, context and location of disposal
- Disposing the tagged objects so as to achieve an even distribution related to context and modality of disposal
While a large part of tagged waste objects were deployed by Senseable City Lab members during a six-day period in Seattle, several volunteers at the location were involved in the project in two ways: One group had their daily trash tagged and subsequently tracked, while on another occasion, a Trash Track tagging event was organized at the Seattle Public Library involving the general public.
In New York, the Senseable City Lab together with the Architectural League attached tags to a number of outdated office equipment, which was subsequently thrown away.
When the exhibition opens on September 17, 500 tags will have been deployed between New York and Seattle. In a second phase of the project, this number will increase to several thousand tags involving additional cities.
Director: Carlo Ratti and Assaf Biderman
Project partner: Waste disposal, Qualcomm, The Architectural League and Sprint
With the support of: City of Seattle, Office of Arts and Cultural Affairs, Seattle Public Utilities and The Seattle Public Library
Video credits: E Roon Kang – video / motiongraphics; Carnaven Chiu – visualization; Dietmar Offenhuber – visualization / proj. lead; Armin Linke – videofootage; Assaf Biderman – storyboard; Carlo Ratti – storyboard / concept
Read more from urbanNext’s journal Responsive Technologies on the urbanNext website.
{% partner_block logo=”/static/img/partners/urbannext.png” description=”urbanNext is a multi-platform aimed at developing and distributing architectural content.” call_to_action=”Visit urbanNext →” url=”https://urbannext.net/” %}